Mössbauer study of LaNiSn and NdNiSn compounds and their deuterides

Summary LaNiSn and NdNiSn compounds and their deuterides have been studied by variable temperature ¹¹⁹Sn M?ssbauer spectroscopy. The hyperfine parameters obtained experimentally are in good agreement with those derived from first principle calculations. The enlargement of quadrupole splitting observed for LaNiSn after deuteration confirms the lower symmetry of electron density around tin atoms indicated by the calculation of partial Sn-p density of states (DOS). Magnetic ordering is observed at low temperature in deuterided NdNiSn.     

New synthetic pathways into dithiazolyl radicals: Preparation and characterisation of 3′-methyl-benzo-1,3,2-dithiazolyl, M’BDTA

A general three-step synthesis to a range of benzo-fused-1,3,2-dithiazolylium salts bearing both electron-withdrawing (CN) and electron-donating (Me) groups is described. This methodology has also been extended to pyridyl derivatives and offers a potential route to a diversity of 1,3,2-dithiazolylium rings and their corresponding 1,3,2-dithiazolyl free radicals. The key steps in the reaction are treatment of a substituted 1,2,-dichlorobenzene with two equivalents of [^tBuS]Na, followed by chlorination to yield the corresponding bis(sulfenyl chloride). Subsequent ring closure with Me₃SiN₃ yields the target 1,3,2-dithiazolylium ring system in good yield. The preparation and crystal structures of 3′-methyl-benzo-1,3,2-dithiazolylium chloride and 3′-methyl-benzo-1,3,2-dithiazolyl are described and the electronic properties of the radical examined through EPR spectroscopy, DFT calculations and variable temperature magnetic susceptibility measurements.     

Identification of Earth Pigments by Applying Hierarchical Cluster Analysis to Solid State Voltammetry. Application to Severely Damaged Frescoes

Multivariate chemometric methods are applied for identifying earth pigments from square‐wave voltammetric measurements performed at pigment‐modified paraffin‐impregnated graphite electrodes allowing for a separation between hematite‐based earths, French ochres, Spanish ochres, siennas, umbers and green earths. This methodology is applied to the identification of the pigments in samples from the ceiling frescoes of Antonio Palomino (dated 1707) in the vaulted nave of the Sant Joan del Mercat church in Valencia (Spain). These frescoes suffered considerable damage by fire during the Spanish Civil War in 1936, resulting in severe chemical and chromatic alterations. Electrochemical data, supported by scanning electron microscopy/energy dispersive X‐ray microanalysis and Raman spectroscopy, indicate that thermal stress induced the transformation of goethite‐based yellow ochres into hematite and magnetite.     

Progress,highlights and perspectives on NiO in perovskite photovoltaics

The power conversion efficiency (PCE) of NiO based perovskite solar cells has recently hit a record 22.1% with a hybrid organic–inorganic perovskite composition and a PCE above 15% in a fully inorganic configuration was achieved. Moreover, NiO processing is a mature technology, with different industrially attractive processes demonstrated in the last few years. These considerations, along with the excellent stabilities reported, clearly point towards NiO as the most efficient inorganic hole selective layer for lead halide perovskite photovoltaics, which is the topic of this review. NiO optoelectronics is discussed by analysing the different doping mechanisms, with a focus on the case of alkaline and transition metal cation dopants. Doping allows tuning the conductivity and the energy levels of NiO, improving the overall performance and adapting the material to a variety of perovskite compositions. Furthermore, we summarise the main investigations on the NiO/perovskite interface stability. In fact, the surface of NiO is commonly oxidised and reactive with perovskite, also under the effect of light, thermal and electrical stress. Interface engineering strategies should be considered aiming at long term stability and the highest efficiency. Finally, we present the main achievements in flexible, fully printed and lead-free perovskite photovoltaics which employ NiO as a layer and provide our perspective to accelerate the improvement of these technologies. Overall, we show that adequately doped and passivated NiO might be an ideal hole selective layer in every possible application of perovskite solar cells.

The power conversion efficiency of NiO based perovskite solar cells has recently hit a record 22.1%. Here, the main advances are reviewed and the role of NiO in the next breakthroughs is discussed.     

Rheology of a lyotropic mesophase through a stress-relaxation experiment

We report on the first rheological study of the structural relaxations in a nematic liquid crystalline phase. Linear dynamic and transient shear experiments were applied to a polydomain nematic phase of the CTAB/water system: a liquid crystalline mixture composed of 28 wt% CTAB at 35 degrees C. The decay of the shear modulus, G(t), was analyzed using the CONTIN inverse Laplace transform to obtain a distribution of relaxation times which were compared with ones from the usual fitting procedure based on a generalized Maxwell model. The behavior of the nematic lyotropic structure of the CTAB/water system is characterized by the presence of both slow and fast relaxation times. These were interpreted as being due to a progressive loss of the lyotropic domain orientation and to the breaking/reforming process of the cylindrical aggregates, respectively.     

From achiral porphyrins to template-imprinted chiral aggregates and further. Self-replication of chiral memory from scratch

The presence of 10-13 M of chiral clusters of aromatic amino acids addresses aggregation of opposite-charged achiral porphyrin towards the formation of smart chiral assemblies. The latter supramolecular complexes are able to self-propagate and transfer their chiral information with a 100% yield. The chiral bias occurs through a correlated sequence of induction, memory, and amplification of chirality that strongly recalls possible prebiotic scenarios.     

DABCO-directed self-assembly of bisporphyrins (DABCO=1,4-diazabicyclo[2.2.2]octane)

Three isomeric zinc bisporphyrins have been prepared by covalently linking together two aminoporphyrins with an isophthalic acid derivative. The porphyrins differ in the substitution pattern on the meso phenyl groups, that is, ortho, meta, or para. Titrations carried out by UV-visible and 1H NMR spectroscopy have been used to map out the stabilities and the stoichiometries of the complexes formed with 1,4-diazabicyclo[2.2.2]octane (DABCO) in chloroform. The ortho- and meta-substituted bisporphyrins form 1:1 intramolecular sandwich complexes. The para-substituted bisporphyrin cannot adopt the cofacial conformation required for this type of complex and forms a higher order 2:2 intermolecular assembly, which is stable over a wide range of DABCO concentrations.     

Study of two diastereomeric pairs of regiosomeric 2-isoxazolines by tandem mass spectrometry with electron impact ionization

On electron impact (EI) ionization, two cis/trans pairs of 4-methyl-5-phenyl and 4-phenyl-5-methyl regioisomeric 3-carbethoxy-2-isoxazolines showed normal mass spectra and mass-analysed ion kinetic energy (MIKE) spectra of metastable (MI) and collision-activated (CA) molecule ions, allowing unequivocal differentiation of the regioisomers. The cis/trans stereoisomers of each regioisomer showed very similar normal mass spectra. Very interestingly, the cis- and trans-4-phenyl-5-methyl stereoisomers appeared reasonably differentiated by the molecule ion MIKE spectra, whereas the 4-methyl-5-phenyl regioisomeric pair of stereoisomers did not. The influence of the phenyl substituent to the fragmentation processes was notable. Some fragments of interest were studied by comparison of their MIKE spectra with those of model ions, generated by EI from suitable substrates, including (i) the isomeric α,β-unsaturated oxime, namely ethyl (Z)-2-(hydroxymino)-3-methyl-4-phenylbut-3-enoate, a by-product of importance for the mechanism(s) of the addition/cycloaddition reactions of nitrile oxides to alkenes and (ii) trans-β-methylstyrene, a dipolarophilic reactant in the same reactions. The favoured heterocyclic C(5)–O(1) bond cleavage occurred only for the ionized 4-methyl-5-phenyl 2-isoxazoline pair, leading to a distonic ion of relevance, as it can represent either a reasonable precursor for both the isomerization to the ionized α,β-unsaturated oxime and the EI-induced cycloreversion yielding ionized β-methylstyrene, or the ionized form of a zwitterionic intermediate, which had been proposed previously for the addition/cycloaddition mechanism(s) in the solution phase, currently under study.     

Flow-injection spectrofluorimetric determination of ethylenethiourea

A flow-injection configuration is proposed for the fluorimetric determination of ethylenethiourea. The procedure is based on the inhibitory effect of ethylenethiourea on the oxidation of thiamine to thiochrome by mercury(II). A linear calibration graph was obtained between 0.1 and 2.0 μg mL^–1, with a sampling rate of 40 samples per hour and a relative standard deviation of about 1.11%. The usefulness of the method was tested for the determination of ethylenethiourea residues in water, milk, potatoes, pear, grape and apple. Received: 26 January 1998 / Revised: 6 April 1998 / Accepted: 9 April 1998     

REDUCTION OF NO BY CO OVER NiWO4, NiO, AND WO3 CATALYSTS

We present a comparative study of NiWO₄, NiO, and WO₃ catalysts for simultaneous conversion of NO and CO. Samples were synthesized by reacting ammonium metatungstate and/or nickel nitrate at high temperature (773 K to 903 K) under an oxygen stream. Catalysts were characterized by X-ray diffraction, surface area measurements, energy dispersive spectroscopy and scanning electron microscopy. The catalytic reduction of NO by CO took place in the temperature range (523 to 973) K under highly reductive conditions (NO:CO= 1:5) over NiWO₄NiO, and WO₃, respectively. The 100 % NO conversion at GHSV of 11460 h^-1 was achieved at 773 K over NiWO₄ and at 848 K over NiO. The WO₃ was deactivated at 898 K. However, in the range (523 to 723) K NiO was more active than NiWO₄ and WO₃ catalysts.